7 Ways To Keep Your Led Lights Growing Without Burning The Midnight Oil
Whereas the marketplace for colored (Red, Green, Blue) RGB LEDs is well established, the market for white LEDs is still growing. Why? Once you think about industries that still rely on white, non-LED lighting, such as for example televisions, automotive manufacturers, computer monitors, notebook computers, LCD backlights, etc., it is possible to understand the push to become the leader in white LED manufacturing.
Lots of people are surprised that a business would avoid a revenue generating opportunity that converting a home or business to LED would create. However, just because replacement white LED bulbs and retrofits are finally in the marketplace, does not mean that they should be on your own immediate grocery list. In very simple terms, the marketplace for colored and color-changing LEDs is mature. While engineers remain finding ways to make sure they are brighter and more efficient, the holy grail of the LED industry is in developing volume production of high-efficiency, high-brightness white LEDs.
It may be better to think about colored LEDs (RGB) and white LEDs when it comes to another industry: Automotive. RGB LEDs are just like the internal combustion engine: Reliable, abundant, easy to use and manufacture, and fairly well toned with regards to the prospect of new or breakthrough technologies. There are lots on manufacturers and each has their own set of patents and “tricks of the trade” to greatly help give themselves some marketing leverage over the competition. White LEDs are like the alternative energy industry for transportation: Quite varied, still relatively “new”, still needing to be market proven, more expensive, more challenging to manage.
There are lots of manufacturers, each utilizing a different technology or mix of technologies to accomplish what they believe is the “another big thing.” Following this analogy, RGB LEDs are mature enough to compete on cost alone and the drop in costs is what fuels new applications for colored LEDs that had not been considered previously. White LEDs, alternatively remain developing technically and really should not be shopped predicated on cost alone. The necessity for quality and longevity is what fuels the further research and development into white LEDs.
11 THINGS TO CONSIDER IN DETERMINING LED UPGRADES
Because there are so many variables that need to be considered, making a fast and simple recommendation about transitioning to white LEDs isn’t possible. To acquire a jump start on the near future, consider every lighting source in each room and establish what it’s primary purpose is. After you have done this, review the next what to help determine where on the priority purchase-list each replacement should be. Below are a few general ideas to help you determine if an LED upgrade is the right choice for you personally:
1.) May be the lighting located in a house where in fact the primary resident is older or has mobility issues?
If the LED replacement produces adequate light levels, LED alternatives are ideal for used in homes where safety is really a top priority. Knowing that an ill or older person won’t need to change a burned-out light bulb again can offer peace-of-mind.
2.) Is initial cost a primary factor in determining if you are going to upgrade?
The existing nature of the white LED market means that prices remain relatively high, especially compared to traditional lighting. As an early adopter means paying a premium; are you more comfortable with knowing you could have paid less for the same technology in the event that you had waited?
3.) May be the light situated in bright daytime sunlight or a location of high heat?
High levels of heat will noticeably shorten the lifespan of any LED, especially white LEDs. When considering LEDs, try to ensure that both the fixture and the location allow for adequate passive cooling in order to avoid color-shift and longevity issues. This is the much bigger concern when considering retrofit bulbs versus considering a “total package” LED fixture and lamp.
4.) Are you having to reduce the heat output from a traditional light source?
In bathrooms, laundry rooms and small spaces, conventional lighting can produce uncomfortable heat. LED lighting is great for these areas because they produce no heat and because affordably illuminating smaller areas with LEDs presents significantly less of a challenge.
5.) Is the lighting located in a location of rough service or environmental extremes?
Garage door openers, unheated/cooled utility rooms and outdoor workshops place extreme demands of lighting equipment. Vibrations that may break a lamp filament and cold temperatures that can result in a fluorescent tube to flicker are of no consequence to LED lighting, making these replacements a simple decision.
6.) May be the brightness critical to the application?
LEDs are directional by nature, so trying to meet a particular brightness expectation over a broad area is not the best usage of LED lamps. The existing crop of standard fluorescent tubes or high-bay lighting will probably be more efficient for these applications.
7.) Are you trying to retrofit a preexisting lighting fixture to accommodate an LED replacement?
Most current lights are made to capture and reflect just as much light as possible from conventional light sources that produce light from all 360 degrees. Because LEDs emit very directional light, you can find often many compromises that must be made by manufacturers to make LEDs “work” for the best number of retrofits. When possible, rather than retrofit bulbs consider a “total package” LED lighting fixture that is designed from the ground up to efficiently use LEDs.
8.) May be the light output and quality of the LED version acceptable compared to your existing lighting?
With all of the lighting technology available (incandescent, fluorescent, LED, etc.) the only method to get a precise idea of the way the lighting will perform would be to compare the light output or lumen and color temperature specifications rather than the wattage as is typical of most folks raised with traditional lighting in the house. THE UNITED STATES Department of Energy has devised a standardized “lighting facts” label similar in concept to the nutrition label entirely on foods, to greatly help consumers compare lighting.
9.) Will be the bulbs you’re considering replacing difficult to access or reach?
If they are, LED replacements are great candidates because once they are changed, you will likely never have to change them again since LEDs do not “burn up” such as a conventional bulb.
10.) Are you currently replacing all the light bulbs in a specific area or just an individual bulb?
Unless you know the color temperature of all the lighting in the area, play the role of consistent in whatever lighting technology you choose. For example, if your room uses primarily halogen lighting, chances are a warm color temperature and changing an individual reading lamp to LED with a cooler lighting temperature will not only be noticeable, but may also be distracting.
11.) Does the power savings and/or return on investment (ROI) make it worthwhile at this point?Prepare 250w led high bay lights using free web calculators to determine how much money you will put away on energy and what the potential profits on return is. Just enter your time rates, the total wattage of one’s conventional lighting and the full total wattage of the LED lighting you are considering and the calculator will tell you how much money each technology will cost you per year.
As you can see, every lighting situation should be considered individually contrary to the above checklist. Doing this will assist you to determine LED upgrade plans that fit within both your allowance and your expectations. In general, LED lighting will continue steadily to improve in both output and efficiency every year similar to the way the non-public computer market has evolved. What could possibly be considered a “middle of the street” LED lamp today, was more than likely considered reduced product a year or two ago. Prioritizing your LED lighting purchases so the basics are covered first and delaying your more demanding lighting requirements as the technology improves will ensure a cushty transition to tomorrows lighting technology.